HIGH EFFICIENCY FILTERS
|
RIGID CELL TYPE AIR FILTER
The Rigid-Pak extended surface air filter has been engineered to provide medium to high efficiency filtration in built-up filter banks and side access housings. Due to its completely rigid design, the Rigid-Pak eliminates the need for retainers and special external wire media supports in variable air volume applications. The Rigid-Pak is designed to operate at a face velocity of 500 fpm and to a final Resistance of 1.2" W.C.
|
|
EXTENDED SURFACE POCKET FILTERS WITH FIBERGLASS & SYNTHETIC MEDIA
- Unique pocket design lengthens filter life
- Low resistance and high dust holding capacity
- Engineered for performance reliability
Fiberglass & Synthetic Media
Available in four efficiencies:
- 90-95%(MERV 15)
- 80-85%(MERV 14)
- 60-65%(MERV 12)
- 40-45%(MERV 8)
Designed for high performance in demanding operating conditions, the Tech Bag extended surface pocket filters are perfect as prefilters and final filters for particulate removal where clean air is required. Tech Bags are an excellent choice for healthcare facilities, automotive paint booths, commercial buildings, and various industrial applications. The Tech Bag features a unique pocket configuration that guarantees complete pocket inflation and eliminates crowding or leakage.
|
|
BIO-PAC - HIGH EFFICIENCY AIR FILTER
- Rugged interlocking diffusion panels secure and protect filter media pockets while evenly distributing air over entire pocket surface. This results in longer life and better performance.
- Pockets available in either premium high loft fiberglass or synthetic media in a range of efficiencies and air flow capacities.
- Span stitched pocket assembly and double stitched, taped pocket edges assure filter integrity in even the most hostile environments.
- Any pocket depth up to 36". Integral support loops standard on all BIO-PACs*.
- UL Class 1 fiberglass media pockets available for high temperature applications.
- Environmentally friendly, reusable polypropylene and recyclable steel components can be part of your LEED "green building" program.
- Guaranteed performance supported by independent lab testing in accordance with ASHRAE test standard 52.2.
- Minimum efficiency reporting value(MERV) up to MERV 14 and 96.1% composite minimum efficiency(CME) on 1 micron and larger particles @ 1968 cfm.
- Patented
|
|
VARICEL FILTERS
VariCel filters are rigid, self supporting filters with dual density media. VariCels are available in three efficiencies MERV 14, MERV 13, and MERV 11. VariCels are available in 6" or 12" depths. Also offered with antimicrobial in 90-95% and 60-65% efficiency.
A unique flanged header on the air entering side allows the filter to be easily inserted and latched into front and side access systems.
VariCel media is made with pleated microglass paper bonded to corrugated aluminum separators. These separators maintain uniform pleat spacing for optimum airflow. The media is made with dual density construction consisting of coarser fibers on the air entering side and finer fibers on the air leaving side. This design allows dirt particles to be collected throughout depth of the filter utilizing the media’s full capacity and cleaning potential. A liner of microglass mat packing at the top and bottom of the media pack prevents damage and bypass leakage.
Additional options include expanded aluminized steel faceguards, factory-installed gaskets and vinyl coated separators for corrosive conditions.
|
|
VARICEL II FILTER
Designed for high performance under both normal and difficult operating conditions, VariCel II is appropriate for general HVAC and applications operating with variable air volume, turbulent airflow, and high humidity. The combination of durable construction and high efficiency also makes VariCel II ideal for specialized systems such as diffusion filters in paint booths and prefilters in cleanrooms.
VariCel II's slim line design provides minimum resistance with the high dust loading capacity of larger, traditional filters. The pleated media is made of microglass paper with a dual density fiber construction and water repellent binder. Two die cut boxes form a sealed, double wall around the perimeter of the filter. Media pack support retainers and adhesive pleat separators are bonded and applied to the pleats. Together, these form a unitized, rigid media pack that maintains pleat spacing and a maximum, even distribution of airflow.
The thinner depth and fiber board frame make handling, storage, and installation the easiest of any high efficiency filter. Disposal is also simplified from the absence of metal components.
|
|
VARICEL II M FILTER
VariCel II M filters are designed for service in HVAC systems with difficult operating conditions, such as variable air volume, turbulent air flow, repeated fan shutdown, or high humidity. Metal construction improves performance while contributing to superior moisture resistance.
The slim-line design of the VariCel II M provides minimum resistance and maximum dust loading capacity, while lowering operating costs. The pleated media is made of microglass paper with a dual density fiber construction and water repellent binder. Rows of adhesive beads are applied to the media to maintain even pleat spacing and provide maximum airflow. The consistent pleat spacing of the media allows higher dust holding capacity and full use of the entire depth of the media. An aluminized steel, expanded metal faceguard is added to the air leaving side of the filter.
Equipped with a U-channel frame, VariCel II M filters can be installed in holding frames or side access housings with a 4" wide track.
|
|
VARICEL II MH FILTER
VariCel II MH filters are designed for service in HVAC systems with difficult operating conditions, such as variable air volume, turbulent air flow, repeated fan shutdown, or high humidity. Metal construction improves performance while contributing to superior moisture resistance.
The slim-line design of the VariCel II MH provides minimum resistance and maximum dust loading capacity, while lowering operating costs. The pleated media is made of microglass paper with a dual density fiber construction and water repellent binder. Rows of adhesive beads are applied to the media to maintain even pleat spacing and provide maximum airflow. The consistent pleat spacing of the media allows higher dust holding capacity and full use of the entire depth of the media. A galvanized steel, expanded metal faceguard is added to the air leaving side of every filter. Faceguards on both sides are optional.
With its galvanized steel header, the VariCel II MH filter can be installed in holding frames or side access housings with a 13/16" wide track. The tracks may be of the stationary type, such as the AAF PolySeal, or with a removable locking mechanism to seal the filters, such as the AAF LeverLock.
|
|
VARICEL M-PAK FILTER
The VariCel M-Pak filter has the same media area and half the weight of a standard 12"-deep VariCel. The M-Pak delivers comparable efficiency, pressure drop, and overall performance, but in a much smaller, 6" package. Its space-saving design reduces freight, storage, and handling costs. M-Pak filters are designed for use in systems with difficult operating conditions, including variable air volume, turbulence, repeated fan shutdown, high humidity or intermittent exposure to water.
High-impact polystyrene cell sides enclose the fixed media pack, made of high-efficiency, moisture resistant fiberglass. The dual layered media is arranged in a progressive density pattern to maximize media utilization and dust holding capacity. Thermoplastic separators maintain uniform spacing between pleats to allow optimal airflow. The separators also ensure a large effective media area to minimize pressure drop and eliminate the need for aluminum separators. All components of the VariCel M-Pak are fully incinerable.
Gasketing and a reverse airflow model are available.
|
|
VARICEL V FILTER
The VariCel V high efficiency filter is designed for service in HVAC installations with difficult operating conditions, such as variable air volume, turbulent airflow, repeated fan shutdown, or moderate to high humidity. These filters can be used in high velocity systems operating at up to 750 FPM. The width and height dimensions are interchangeable and the filters can be installed with the pleats either vertical or horizontal without affecting performance.
VariCel V filters consist of multiple media packs assembled into a series of V-banks to substantially increase effective media area. The microglass fiber pleated media features a dual layer, progressive density design for maximum dust holding capacity. Between pleats, thermoplastic bead separators support and allow minimum spacing for optimal airflow. Light-weight plastic and aluminum construction results in a rust-free and totally incinerable product that is easy to install, remove, and transport.
|
|
VARICEL VXL FILTER
The VariCel VXL high efficiency filter is designed for service in HVAC installations with difficult operating conditions, such as variable air volume, turbulent airflow, repeated fan shutdown, or moderate to high humidity. These 8-panel filters can be used in high velocity systems operating at up to 750 FPM. The width and height dimensions are interchangeable and the filters can be installed with the pleats either vertical or horizontal without affecting performance.
VariCel VXL pleated media is manufactured with our dual-density design of glass fiber layers for maximum dust holding capacity. The header and cell sides provide a sturdy construction that resists damage during shipping, handling, and operation. Thermoplastic separators maintain uniform spacing between pleats to allow optimal air flow and a large effective media area. Constructed of plastic, the VariCel VXL is fully incinerable.
|
|
BIOCEL I FILTER
The BioCel I filter is designed to remove airborne biological contaminants in hospital critical areas and food and pharmaceutical processing plants. It has also been engineered to meet the exacting requirements of precision manufacturing operations and laboratories. Due to the rigid all metal construction and water resistant pleated media, BioCel I filters can operate under difficult conditions, including variable air volume, turbulent airflow, and high temperature and humidity. This compact, lightweight filter is rated 95% efficiency on 0.3 µm by the DOP test method.
BioCel I filters consist of a pleated, ultra-fine fiberglass media pack enclosed in a galvanized steel box assembly. Corrugated aluminum separators maintain uniform spacing between each pleat to maximize airflow. In this single header model, a galvanized steel header on the air entering side interlocks with the cell sides for rigid construction and leak prevention. Bar braces and expanded metal faceguards (optional) are installed on both sides of the filter to provide extra reinforcement.
|
|
BIOCEL M-PAK FILTER
BioCel M-Pak filters offer the same media area as the traditional BioCel 12"-deep filter in a compact, lightweight design. Rated 95% efficiency on 0.3 µm (DOP), the M-Pak also delivers comparable pressure drop and overall performance in a much smaller package. The BioCel M-Pak is designed to remove airborne biological contaminants in hospital critical areas and food and pharmaceutical processing plants. It is engineered to meet the exacting requirements of precision manufacturing operations and laboratories.
BioCel M-Pak pleated media is made of high-efficiency, microglass paper with water repellent binder. Adhesive bead separators are applied in rows to both sides of the media. Adjacent separators bond to each other, forming a unitized, rigid media pack enclosed by a frame of high-impact polystryrene (HIPS) plastic. The M-Pak's space-saving design reduces freight, storage, and handling costs. Constructed without metal components, it is fully incinerable. To maximize filter life, use BioCel M-Pak with high quality AAF prefilters.
|
|
BIOCEL VXL FILTER
The BioCel VXL is designed to remove airborne biological contaminants from hospital critical areas and food and pharmaceutical processing plants. Rated MERV 16, it is ideal for any application where a very high level of efficiency is necessary, but where the existing air handling system cannot accommodate HEPA filters. BioCel VXL provides 97.9% efficiency on 0.3µ particles with an initial pressure drop of 0.60" w.g., less than one-half the resistance of a traditional HEPA filter.
BioCel VXL pleated media is made of ultra-fine, microglass paper uniformly spaced by thermoplastic separators. The high-impact polystyrene (HIPS) cell sides are lightweight and rugged, allowing the filter to resist damage during shipping, handling and operation. Constructed without metal components, the BioCel VXL is fully incinerable.
|
|
Contact Head Office
|
